Megger Hattrick-KIT Equipment tester set Deals

Product Name: Megger Hattrick-KIT Equipment tester set

Product Category: Wire & Cable Hand Tools in Hardware

Manufacturer: Megger

Product Features :

• No features available.

The complete set for testing electrical charging infrastructureMultifunctional test device MFT1845The MFT1845 Multifunction Tester is a device for testing low-voltage electrical installations, especially for locations with Hohem electrical noise. It offers all the necessary tests, in order to carry out the necessary electrical certification for fixed wiring installations in industry, trade and household. It has the following features:Voltage and frequency measurement with TRMS systemInsulation test at 100 V, 250 V, 500 V and 1000 V, including input protection against live circuits up to 600 V, even with locked insulation testForward resistance at 200 mA or 15 mAAutomatic start - no need to press the TEST button so that both hands remain free to hold the probesResistance range up to 100 kΩ and fast continuity testing with buzzer at selectable limitsEarth loop impedance test, with:- New non-triggering 3-wire technology- New confidence measuring- Non-triggering area with 2 and 3 conductors- 2-wire high current, including phase-to-phase- Potential measurement of error current up to 20 kARCD testing, including:- Type AC, A, S, B and programmable RCDs- 3-phase RCDs- Automatic test routine- Error voltage displayGround spike testing- 2-pin/3-pin*, ART* and stakeless* techniquesCharging station adapter for electric vehicles EVCA210The Megger EVCA210/EVCA210-UK are compact, easy-to-use adapters that perform all the functions required by the electrical installer to fully test mode 3 AC charging stations for electric vehicles. The EVCA210/EVCA210-UK has been specially developed to meet UK, European and other international wiring regulations and standards. They can be used with all single and three-phase charging stations of electric vehicles with the corresponding plug connectors. They are designed to check the function and safety of a charging station. Using the adapters you can test with suitable single or multi-function measuring devices at EV charging stations in accordance with IEC/EN 61851-1 and IEC/HD 60364-7-722. Charging stations should be checked and regularly checked during the initial installation.The EGGER test adapters EVCA210/EVCA210-UK were developed to simulate the connection of an electric vehicle to the charging station under test. By connecting the adapter, the operator can initiate the charging process by selecting the appropriate proximity pilot (PP) and control pilot (CP) states. Testing devices can be connected either via the front-mounted mains socket or the 4-mm connections L1, L2, L3, N and PE. 2 additional CP signal connections enable the operator to measure the CP signal with an oscilloscope.In addition, the adapters have a manual PE pre-test function that allows the user to check for dangerous voltages on the PE line before each other test of the charging station. If this test fails, the test must be terminated as there may be dangerous voltages on the PE line and errors must be investigated and corrected before continuing. The adapters also include two additional manual tests: CP fault – simulates a fault in the pilot circuit; and PE fault, which simulates a disconnection of the PE circuit. Both tests ensure correct separation of the charging station output. Before performing tests with this adapter, it is recommended that the user familiarize himself with the relevant standards: IEC 61851-1:2017: Conductive charging system for electric vehicles – Part 1: General requirements IEC 60364-7-722:2018: Electrical low voltage systems – Part 7-722: Requirements for special installations or locations – Power supply for electric vehicles and any documentation for the charging station itselfThe Megger EVCA210-UK comes standard with 2 connection cables, a Type 2 connector for control panel mount power sockets or fixed cables with vehicle connectors, and a Type 1 connector for fixe

Why compare prices for Megger Hattrick-KIT?

ShopMerit works with hundreds of UK retailers to provide you with the best possible prices for Wire & Cable Hand Tools, deals and retailer vouchers codes. So comparing prices on Wire & Cable Hand Tools just like Megger Hattrick-KIT Equipment tester set is easy and also can save your hard earned cash when shopping online.

We’re pretty sure that you’ll find the best price for a Megger Hattrick-KITat ShopMerit.com.