Eltako 61100832 Universal dimmer Deals

Product Name: Eltako 61100832 Universal dimmer

Product Category: Electrical Wires & Cable in Hardware

Manufacturer: Eltako

Product Features :

• No features available.

Without N-connection, Power MOSFET up to 200W. Standby loss of only 0.5 watts. With control inputs for light sensor and light switches Minimum brightness, operating mode and dimming speed can be set. For panel mounting. 45mm long, 45mm wide, 18mm deep. Universal dimming switch for R and C loads up to 200W, depending on the ventilation conditions. Dimmable ESL and 230V-LED lamps in the operating mode Phase section up to 200W or in the operating mode Phase section up to 40W, depending on the ventilation conditions. For dimmable 230V LED lamps, which glow slightly even when the device is switched off, a base load element BLE must be connected in parallel to the lamp. L-loads (inductive loads, e.g. wound transformers) must not be connected. Switching in zero crossing with soft-on and soft-off for lamp protection. Control voltage, supply voltage and switching voltage 230V. Minimum load 4W Short control commands switch on / off, permanent controls change the brightness up to the maximum value. An interruption of the control changes the dimming direction. The set brightness level remains stored when the device is switched off (memory). Memory can be switched off by turning the upper rotary switch three times to the right stop (max.). ESL can then also be switched. Switch on memory again (factory setting) by turning it three times to the left stop (min). In the event of a power failure, the switching position and the brightness level are saved and, if necessary, switched on when the supply voltage returns. Automatic electronic overload protection and over-temperature switch-off. With the upper % rotary switch, you can set the minimum brightness (fully dimmed). With the lower dim speed rotary switch, you can select between the operating mode phase section (P-OFF) or phase section (P-ON), set the dimming speed and at the same time change the duration of soft-on and soft-off. If light switches cannot be replaced by light switches, there is a separate control input for light switches: If the closed switch is opened again briefly, then it is dimmed until it is opened again briefly. The dimming direction is changed automatically at the two vertices. In addition, the direction can be changed by briefly opening the switch twice. With children's room switch (only for activation with button): When switched on with longer button activation, the light is switched on at the lowest brightness after approx. 1 second and, as long as it is still being scanned, slowly dimmed up without changing the last brightness level saved. With snooze function (only for activation with button): By a double pulse, the lighting is dimmed from the current dimming position up to the minimum brightness and switched off. The max. dimming time of 60 minutes depends on the current dimming position and the set minimum brightness and can therefore be shortened accordingly. By means of short buttons, you can switch off at any time during the dimming process. A long button during the dimming process dims up and ends the snooze function. Without N-connection, therefore suitable for mounting directly behind the light sensor or light switch, even if no N-line is available.This text is machine translated.

Why compare prices for Eltako 61100832?

ShopMerit works with hundreds of UK retailers to provide you with the best possible prices for Electrical Wires & Cable, deals and retailer vouchers codes. So comparing prices on Electrical Wires & Cable just like Eltako 61100832 Universal dimmer is easy and also can save your hard earned cash when shopping online.

We’re pretty sure that you’ll find the best price for a Eltako 61100832at ShopMerit.com.